DescriptionProduct Description
The main alloying elements of solid square bar made of magnesium and silicon. And form a Mg2Si phase. If it contains a certain amount of manganese and chromium, it can neutralize the bad effect of iron; sometimes a small amount of copper or zinc is added to increase the strength of the alloy without significantly reducing the corrosion resistance; there is still a small amount in the conductive material. Copper to offset the adverse effects of titanium and iron on electrical conductivity; Material Introduction Chemical Composition of Aluminum Extrusion Profiles Alloy6063606160606005 Si0.2-0.60.4-0.80-0.60-0.9 Mg0.45-0.90.8-1.20.35-0.60.4-0.6 Fe<0.35<0.70.1-0.30.35 Cu<0.10.15-0.4≤0.10.1 Mn<0.1<0.15≤0.10.1 Zn<0.1<0.25≤0.150.1 Cr<0.10.04-0.35≤0.050.1 Ti<0.1<0.15<0.10.1 ImpurityUnit<0.05<0.05<0.05<0.05 Total<0.15<0.15<0.15<0.15 AlRemainderRemainderRemainderRemainder Technical Data of Aluminum Extrusion Profiles AlloyTemperThicknessTensileYieldVickersWebster StrengthStrengthHardnessHardness 6005T6≤5≥270MP≥225MP T65<e≤10≥260MP≥215MP T610<e≤25≥250MP≥200MP 6060T6≤3≥190MP≥150MP T63<e≤25≥170MP≥140MP 6061T6 ≥265MP≥245MPHV≥58HW≥8 6063T5 ≥160MP≥110MPHV≥58HW≥8 T6 ≥205MP≥180MPHV≥58HW≥8 Features · Good quality raw material: international standard raw materials. · High corrosion resistance. · Widespread application. · RoHS Compliant available. FAQ Q:Why do you use 6000 series aluminium extrusion alloy? A:6000 series aluminium extrusion alloys are widely available and suited to most commercial applications, making them a good choice of alloy for much of the work we undertake for our customers. And 6000 series aluminium extrusion alloys are also well suited to fabrication such as welding, are versatile and hard-wearing enough for use in a variety of commercial and industrial applications, and offer good corrosion resistance and formability.Extruded Aluminum Shapes suppliers website:http://www.yida-alu.com/aluminum-extrusion-profiles/extruded-aluminum-shapes/ Attachments |